Hi,
Is anyone able to provide a price, inc P&P, on a set of printed parts for a box frame Prusa i3, in ABS or mixed ABS/PLA with the printed parts near heat sources in ABS ? (bushing.stl , y-carriage.stl and groovemount in ABS)
I only have ABS filament, so will be printing with hotend temps ~230C and bed temps ~100C, concerned that PLA printed parts could distort with heat ?
Although I have ordered a E3D v4 hotend, which apparently is quite cool near the top of heatsink, so maybe not so much of an issue as with J-Heads ? there is still a potential issue with heated bed though.
Would like all the parts required to get me up and printing please. So including those printed parts in the main github Prusa3/box_frame/ directory I would also need the following from the Prusa3/box_frame/extras/ directory :
endstop-holder.scad
gear-big.scad
gear-small.scad
gregs-wade-v3.scad
groovemount.scad
This is my first build, so not 100% certain I haven't missed something, advice would be appreciated.
There is a complete set on ebay & eMaker for £35, but it's PLA only.
Quotes via here or PM.
Edit:: should have added this originally, but due to cost of postage from abroad, probably best to keep to quotes from UK residents.
Thanks.
Masnachu.
Edited 1 time(s). Last edit at 05/31/2013 08:58AM by Masnachu.