Welcome! Log In Create A New Profile

Advanced

Fully assembled ready to print 12x12x8 HBP RepRap Mendel. The Future Is 3-D.

Posted by Adventure 
Fully assembled ready to print 12x12x8 HBP RepRap Mendel. The Future Is 3-D.
November 26, 2010 08:38PM
Come check out our site for information on our kits and our fully built Mendel’s.

Take a look at the documentation and download section.

Watch your printer being built, and watch it print before you buy.

Get on our Mendel list at no cost to you.

You only pay when you approve the printer. We now have our own extruder design that fits a standard Mendel carriage.

Our printers are tested for a week of non-stop printing before being shipped.

Our promise to you is a quality built printer.

We also will send you free upgrades as we develop them.

If you have purchased a fully built mess (Mendel) from someone else you can send it to us, and we will get it going for you.

Each printer is custom calibrated so you are ready to print day one. Each printers serial number has a custom replicatorG download for it.

We want our customers to be happy and will do all we can to make you happy.

Our Mendel’s are also printed on Mendel’s. We are not using a commercial grade printer like a Stratasys or U-print. We want you to know that we know how to use what we sell.

I have run into companies that have no clue and defer all the questions to the place they purchased their equipment from. So basically they collect the money and dump the tech support on someone else.

Our wait time for a machine might be long. However, there is a reason for that... Quality....

We don’t have a store because each person is special, and we want to have that one on one to get you exactly what you need.

thefutureis3d.com

See you there and happy 3-D printing.

Edited 27 time(s). Last edit at 07/02/2011 10:33PM by Adventure.
Hello,

I'm seriously considering to buy one of those. What about the raw material? Excuse me if I'm a bit uninformed, but I have heard they use some polymer powder. Where to get it, can I mix my own stuff like in that open source project?

Also - what's the shipping costs for delivery to Germany?

Sincerely,

André Lerch
Re: Fully assembled ready to print RepRap Mendel printed in PLA plastic. $1299.00
June 19, 2011 10:26AM
We use ABS or PLA 3MM filament.

Easy to get. We sell it on our website. There are a number of places you can get it. If you could find it in your area you would probably save money.

Shipping cost will be around $150.00.

E-mail support@thefutureis3d.com for any other questions.


Jeff Christiana
Sorry, only registered users may post in this forum.

Click here to login