Wades Geared Extruder plastic+hardware $35AUS within australia $45AUS international (including shipping)

kit expired

Edited 4 time(s). Last edit at 05/27/2011 02:35AM by mlagana.

also, all proceeds will go towards molding a full mendel kit to sell. (will be sold without extruder parts)

ok i've lowered prices so now the kit is only 39 American dollars, 25 Pounds, 28 Euros.. (postage and handling included).

just ordered

---

-----------------------------------------------
Wooden Mendel
Teacup Firmware

just sent a couple out, here is a picture of how it will arrive:




in the bag is 4 m3 bolts, 4 m3 washers and 4 m4 washers (to attach your motor), also two m3 bolts + 2 washers and 2 nuts for attaching the extruder to your printer.

all that you need are the two m3 bolts needed to put through the PTFE of your hot end, and a 2.5 drill bit and drill press/hand drill and vice

my extruder which is the same as pictured has so far extruded almost 1lb of ABS has had a constant flow all along and hasn't had any plastic stuck in its teeth so far.

Edited 1 time(s). Last edit at 11/12/2010 01:20AM by mlagana.