HUGE PART SALE!! NEMA 17s, NEMA 23s, LCDs, RAMPS, ALUMINUM EXTRUSION, AND MORE!!

ok, here is part 2 of my studio clean out. Buy covers shipping and paypal fees.



RAPMAN Acrylic parts - $15





Misumi 1515 aluminum extrusion lengths are listed below - $60
-10x 45 degree braces
-1x 420mm
-2x 387mm
-14x 398mm
-2x 340mm
-1x 183mm
-1x 130mm
-1x 87mm
-4x 497mm
-4x 578mm
-1x 631mm
-2x 657mm

NEMA 23 motor with cables - $12
600mm linear rails - $100
600mm TR8 8mm lead screw with brass nuts -
250W ATX PSU - $20



2. Bitumen tape. Works great for dampening vibrations and insulating. - $5
3. Scrap 1515 Misumi extrusions. Various lengths - $8
5. 5/16"-18 x 36" threaded rod. New condition - $10 for all
6. M8 threaded rod. 14" length. - $8 for all
7. 12mm smooth rod. Various lengths. $16 for all



Large box of old parts and miss-prints. Can be ground and shredded and re extruded into new filament. - $5




1. ATX power supply case and filament spool holder. - $10
2. Power block - $8
3. open-ended ethernet cable - $2
4. Power supply plug cable - $3
5. 6ft RAMPS USB cable - $5
6. 2ft RAMPS USB cable - $4
7. LCD screen. Bought from Panucatt with Azteeg. - $20
10. red RAMPS board with arduino and 4 drivers - $28
11. LCD screen with RAMPS adapter - $18
13. 80mm fan - $8 each
14. 40mm fan - $5 each
16. Brand New RAMPS LCD with adapter - $22



1. Heated Build plate - $15
2. Aluminum heat spreader - $20
3. Wooden build plate - $5
5. Glass plate - $8

If you have any questions, feel free to PM me.

---

greghoge.com

HUGE 3D PRINTER PARTS SALE!!!

BUY ALL 4040 parts (extrusions, corner brackets, gussets, t joints, and hardware) FOR 180!

Here's some more stuff I'm selling:







4040 Aluminum extrusion. 16 pieces, each 26" long. They are in used condition. Comes with a bag of M8 nuts and bolts.
One piece has a cut repaired with JB weld, it is still fully usable and works great. $100




Aluminum corner bracket. Made for 4040 extrusion. In good condition. Includes all 4. $25.




Aluminum corner gussets. Made for 4040 extrusion. In good condition. Includes all 8. $40.




Aluminum t joints. Made for 4040 extrusion. In good condition. Includes all 8. $40.

BUY ALL 4040 parts (extrusions, corner brackets, gussets, t joints, and hardware) FOR 180!

---

greghoge.com

HUGE 3D PRINTER PARTS SALE!!!

I'm interested in the Misumi 1515 package in your first post, will PM further information.

---

Please add your printer design to [reprap.org]

Still have a bunch of parts available. I also posted some things on ebay. You can check them out here:

[ebay.com]

Edited 1 time(s). Last edit at 04/13/2015 09:05AM by gmh39.

---

greghoge.com

HUGE 3D PRINTER PARTS SALE!!!