3D Printer Extruder J Hotend MK IV Fully Assembled

Fully Assembled J Hotend 1.75 mm available in stock with very good discounted prices.

It includes following items :
1) Cartridge Heater (12V, 40W) solder with 4Pin female molex connector.

2) PEEK Core (more about PEEK)

3) Brass nozzle (0.4mm) with heater block

4) PTFE Tube

5) Brass rod and M6 nuts (For mounting) [Note: Instead of brass rod for mounting, set screw option is also available.

6) G550 Thermistor (100K)

7)Teflon Sleeves (To cover open ends of thermistor)

8) Heat Sink Sleeve (To cover open ends of cables)



Refer : [makemendel.com]

You will get good printing quality with our extruder, You can see images of 3D Printed parts on our website.
Here : [makemendel.com]

You can contact us on support@makemendel.com or on Skype : makemendel

Thanks in Advance!!