[
cgi.ebay.co.uk]
seller my printers at last
Standard Features:
• Creates plastic parts up to 180mm x 180mm" x 80mm"
• Uses 1.75mm plastic filament (ABS recommended, PLA possible)
• 360mm x 360mm x 360mm case footprint (L x W x H)
• Durable metal frame
• Fully Assembled & Tested
• Glass Heated Build Plate
• 20A power supply
• Open design (no outer cover/door)
Software:
• Able to print .STL & .DXF files
• Windows, Mac, & Linux compatible
What's in the box?
• 3d PrintTech PM MK1 3D Printer, fully assembled & tested
• Small roll of starter filament (enough for a few test prints)
• USB Cable
Tech Specs:
• Fused Filament Fabrication (FFF)a.k.a Thermoplastic Extrusion (link)
• Ramps/Arduino Motherboard (fitted to back of case)
• Extruder moves in the horizontal plane (X-Y), Build Platform moves in the vertical direction (Z)
• Spring loaded Extruder with stepper motor, .4mm nozzle
• ABS filament recommended, but using PLA is possible.
• Power Supply Works on US Voltage (120V must change switch on supply) or European Voltage (240V)
Precision:
• Able to print .4mm, .3mm, .2mm, .1mm hights
contact me for further info.
[
www.3dprintingtech.co.uk]
