-=( Aluhotend from $38, 0.3,0.4,0.5 nozzle sizes and dual packs now available

"AluhotendV5B"



The AluhotendV5B-1.75mm/3mm is designed for general use high resolution printing with PLA , ABS and NYLON, The nozzle size is 0.4mm, the hotend comes assembled and ready for use at temperatures up to 245c. It features a PTFE liner for a high degree of reliability ,This hotend requires a fan blowing on the heatsink for proper operation just like every other hotend.

0.3mm , 0.4mm 0.5mm nozzle options now available

click here for images of parts printed with this hotend

youtube video

single: from $38 - freeshipping
twin: from $66 - freeshipping


*price is for bare hotend

contact me via pm
email: thejollygrimreaper@gmail.com
irc: #reprap

website: www.3dindustriesaustralia.com.au
wiki link : Aluhotend wiki page
ebay:ebay link



*shipping is via standard Airmail and does not include a tracking number or insurance certain countries maybe excluded due to past trouble with unreliable mail delivery, if you aren't confident in your local mail service use the "pack and send" or "registered post" options available when you make your purchase,

---

-=( blog )=- -=( thingiverse )=- -=( 3Dindustries )=- -=( Aluhotend - mostly metal hotend)=--=( Facebook )=-

printed this yesterday with one of these :
0.75mm layerheight


Edited 2 time(s). Last edit at 07/30/2014 09:42PM by thejollygrimreaper.

---

-=( blog )=- -=( thingiverse )=- -=( 3Dindustries )=- -=( Aluhotend - mostly metal hotend)=--=( Facebook )=-

bump

---

-=( blog )=- -=( thingiverse )=- -=( 3Dindustries )=- -=( Aluhotend - mostly metal hotend)=--=( Facebook )=-