Reprap reprappr mendel Huxley Extruder hot end
Attention :A0.4 -----0.4mm nozzle kit package (when you buy A036 , please chose white color .not real color)
A0.5-------0.5mm nozzle kit package (when you buy A05, please chose black color ,not real color)
B0.4------0.4mm nozzle already assembled (when you buy B036,please chose green,not real color)
B0.5--------0.5mm nozzle already assembled (when you buy B05,please chose red color,not real color)
Use material: ABS PLA 1.75 mm
Nozzle diameter: 0.5, 0.4
Heating temperature: 0-270 degrees
Thermistor: 100 k
Heat resistance: 9 ohms
note: the length of the plastic tube is 300mm(default), if you need longer tube , contact us please.
only $59
Edited 1 time(s). Last edit at 07/17/2014 04:17AM by wlf3D.
