Hello, We've got a lot going on at printedsolid.com. Sales available for shipping in the US or local pickup in Newark, DE. International orders accepted, but shipping must be quoted for each order.
Stop by and check us out.
We are the
US distributor of colorFabb filaments and carry their full line of PLA/PHA, woodfill, and XT materials. All of their materials maintain a very consistent diameter. The 3mm filament is made to a nominal 2.85mm for easy bowden performance on Ultimakers and other 3mm bowden machines. Of course it works well on direct drive machines as well.
The PLA/PHA is a modified PLA that is toughened by the addition of PHA. It is available in 29 different colors that are matched to color standards (Pantone, RAL, etc).
Woodfill is 30% pinewood in a PLA/PHA matrix. It has better mechanical properties than other wood filaments, maintains constant color over temperature, and has very low warpage.
XT is a PET based material. It is highly translucent and can be printed nearly transparent with careful tuning of printer settings. It can be printed without a heated build plate, but can also withstand higher operating temperatures compared to PLA.
Due to the package size, all colorFabb materials are $5.49 shipping. Everything else in the shop is free shipping in the US.
Some of the other materials we carry:
The full line of Taulman filaments (bridge, 645, 618, and t-glase.
Madesolid PET+. Currently on very deep discount of $31.50 a spool with free US shipping using coupon code PET+.
Protopasta Carbon Fiber and High Temperature PLA. (High temp PLA in stock, but not loaded in the shop yet)
Ninjaflex TPE filament in all colors (also in stock, but not loaded in the shop yet)
Reprap stuff:
We carry the reprap discount XXL and smart graphics controllers as well as their hexagon all metal hot end.
We also carry the E3D V5 and stock replacement parts. The V6 should be here next week.
Matthew Gorton
US Reseller for colorFabb filaments
3D Printing and Design services
[
www.printedsolid.com]
