Multi Material 3d printer for PLA, ABS, Nylon, ceramics, chocolate, cake, engraving, laser cutting, 5-axis milling or driving the photo camera shutter.

3dprintersonlinestore.com - ZMorph 2.0 , more than 3D printer!

3D Printer Zmorph has a set of replaceable printheads. You can print out materials such as PLA, ABS, Nylon, ceramics, chocolate and cake or use it for engraving, laser cutting, 5-axis milling or driving the photo camera shutter.

ZMorph personal fabricator - 3D printer, milling machine, cartesian bot and more - all in one!

Fully assembled, tested and working - manufactured to order. Product includes : - ZMorph 3D personal fabricator, able to work with materials such as ABS, PLA plastics, wood (milling), policarbonate, ceramics and chocolate !

• ZMorph 3D removable plastic extruder - supporting 3mm filament (PLA or ABS)


• Bonus : spool for ABS, stand for spool, hex key set, little screwdriver, first print


• 1kg of white ABS plastic, for quick start


• 100ml of ABS juice, special mixture to be painted on glass printbed to improve adhesion of your prints (includes brush for easy application)


• Instruction manual


• SD card pre-loaded with config files


• Access to dedicated software platform


• 12 months warranty for extruder, printbed and electronics

ZMORPH 2.0 SPECIFICATION:

CONSTRUCTION: Aluminum 3 mm and 6 mm (precise and very rigid frame), other parts are made of 3 mm translucent polycarbonate and ABS

WORK AREA: 250 x 235 x 165 mm (max. 300 x 235 x 165 mm using a special table)

MATERIALS: ABS, PLA, nylon (Taulman or other source), ceramics, cake and chocolate, metal engraving

TYPES OF NOZZLE: Replacement head with a diameter of 0.4 mm. Possible to buy additionall nozzles with hole 0.3 mm, 0.5 mm

SUPPORTED FILAMENT DIAMETER: 3 mm, 1.75 mm

MAXIMUM SPEED OF MOVEMENT IDLE: 500 mm/s

RECOMMENDED SPEED PRINTING WITH ABS FOR LAYER THICKNESS 0.3 mm: 60-150 mm/s, depending on the desired print quality. Higher speeds are possible when printing on lower layers, in addition, faster printing using PLA

RECOMMENDED ACCELERATION: 2500 mm/s^2

MINIMUM HEIGHT OF LAYERS: 0.1 mm (ABS), 0.05 - 0.025 mm (PLA)

HEATED TABLE DESIGN: 5 mm tempered glass, Kapton heating mat 175W, operating temperature: 60-140 Celsius degrees

EXTRUDERS REPLACEMENT: 3 mm plastic extruder, 1.75 mm plastic extruder, cake and chocolate extruder, ceramics extruder, Dremel mount (which converts the machine to CNC milling machine), laser cutter (in progress), photo camera controller

COMMUNICATION: USB and LAN (can use WIFI to communicate). Stand alone printing supported via Panel + internal SD card.

ELECTRONICS: Sunbeam 2.0 with LPC1769 ARM processor, equipped with 5 drivers stepper motors - 3 for XYZ axis, 2 for the multi-tip (including double-head extruder). Controlled by Smoothieware (http://smoothieware.org/)

NAVIGATION: LCD display panel with custom menu and graphics

FIRMWARE: Voxelizer, Smoothieware

DIMENSIONS AND WEIGHT: 530 x 555 x 480 mm, 25kg

Product delivery time is now 4 weeks. Units in box: 1

Optional Tool Heads (Not Included with the Printer)

Photo Camera Driver

Now you can attach this amazing device to one of toolhead connection sockets, and you can drive your DSLR camera shutter any time you want. The only thing you need is to add M150 to your gcode file (for example at layer change), and get amazing time-lapses of your prints.

ZMorph Ceramics Extruder

ZMorph Personal Fabricator is designed in modular way. Replacement and maitenance of extruder, heated build platform or electronics are user friendly and even person without technical knowledge can easy do it.

Exchangable toolhead allows extrusion of medium density ceramics mass.

Working: Device produces high pressure by using piston. Mass is extruded outside by 1,5mm diameter nozzle.

By suitable settings it can give good quality of product.

ZMorph Dremel Mount

mount for dremel tool, for easy engraving cutting and milling

Dremel mount allows cutting and CNC engraving which effectively converts ZMorph to a fully functional milling machine. You need to replace your standard plastic extruder with dremel mount, position the dremel inside, and secure with 4 screws.

Before proceeding, make sure you home X and Y axis, and position material on the work table. Don't home Z axis - the level of the tool will be controlled by Voxelizer software, and it's settings.

To create milled/cut elements load DXF geometry to Voxelizer, and generate the toolpath. Once this is done hit 'PRINT' button to run the procedure. You can pause it at any moment by pressing 'Pause' button on front panel of the machine.

Note!

Dremel is not included. Price refers only to the mount!

ZMorph Dough & Chocolate Extruder

ZMorph Personal Fabricator is designed in modular way. Replacement and maitenance of extruder, heated build platform or electronics are user friendly and even person without technical knowledge can easily do it.

• Exchangable toolhead allows to print with food mass, for example pastry, chocolate or marmelade.


• Food mass need to be prepare without papules.


• Using this tool you can create signs on cakes or create your own food design.


• Container capacity: ca. 150ml.

Working:

Food mass is automatically charged to specially designed pump.

Extruder doesn't contains heated parts.

Note! Experimental device

Movie showing how it works :