[worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ...
Posted by 3D Andy
|
[worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... May 19, 2013 05:00AM |
Registered: 11 years ago Posts: 65 |
Hello everyone!
Take a look at my listings at eMAKERshop (http://www.emakershop.com/Seller=2273)!
I offer there:
- printed parts for RepRapPro Huxley, Prusa i2, RepRapPro Mono Mendel, RepRapPro Tricolour Mendel
- different extruder drives
- complete hardware-kits for Huxley printers
- hobbed bolts M6, M6 and for MiniExtruders
- heatsink-sets
- crimp connectors for steppers / endstops / thermistors
- igus clip-type plain bushings (6mm & 8mm)
- igus linear bearings (6mm)
Happy shopping!
Best wishes
3D Andy
Edited 1 time(s). Last edit at 05/19/2013 05:00AM by 3D Andy.
Take a look at my listings at eMAKERshop (http://www.emakershop.com/Seller=2273)!
I offer there:
- printed parts for RepRapPro Huxley, Prusa i2, RepRapPro Mono Mendel, RepRapPro Tricolour Mendel
- different extruder drives
- complete hardware-kits for Huxley printers
- hobbed bolts M6, M6 and for MiniExtruders
- heatsink-sets
- crimp connectors for steppers / endstops / thermistors
- igus clip-type plain bushings (6mm & 8mm)
- igus linear bearings (6mm)
Happy shopping!
Best wishes
3D Andy
Edited 1 time(s). Last edit at 05/19/2013 05:00AM by 3D Andy.
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... June 05, 2013 11:59AM |
Registered: 11 years ago Posts: 65 |
Hello everyone,
now available: printed parts kit for "Mini Prusa i3" - see it on eMAKERshop (http://www.emakershop.com/listing?l=654).
Also new: crimp connector set for your 3d-printer (http://www.emakershop.com/listing?l=614)
Best wishes
3D Andy
Edited 1 time(s). Last edit at 06/05/2013 12:00PM by 3D Andy.
now available: printed parts kit for "Mini Prusa i3" - see it on eMAKERshop (http://www.emakershop.com/listing?l=654).
Also new: crimp connector set for your 3d-printer (http://www.emakershop.com/listing?l=614)
Best wishes
3D Andy
Edited 1 time(s). Last edit at 06/05/2013 12:00PM by 3D Andy.
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... June 10, 2013 05:52PM |
Registered: 11 years ago Posts: 65 |
Hi,
from now I am able to offer you new very low shipping fees! For many articles the shipping costs would be cut to half!
Take a look at my articles on eMAKERshop (http://www.emakershop.com/Seller=2273).
Thanks for visiting.
Best wishes
3D Andy
from now I am able to offer you new very low shipping fees! For many articles the shipping costs would be cut to half!
Take a look at my articles on eMAKERshop (http://www.emakershop.com/Seller=2273).
Thanks for visiting.
Best wishes
3D Andy
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... June 14, 2013 05:49PM |
Registered: 11 years ago Posts: 65 |
Hi,
complete hardware kits available at a lower price (starting from 105 Euro). See http://www.emakershop.com/Seller=2273.
Looking forward for your orders ;-)
Best wishes
3D Andy
complete hardware kits available at a lower price (starting from 105 Euro). See http://www.emakershop.com/Seller=2273.
Looking forward for your orders ;-)
Best wishes
3D Andy
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... June 23, 2013 05:12AM |
Registered: 11 years ago Posts: 65 |
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... June 27, 2013 06:59AM |
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... June 27, 2013 04:10PM |
Registered: 11 years ago Posts: 65 |
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... July 06, 2013 03:24AM |
Registered: 13 years ago Posts: 615 |
I'm using it in my mini-extruders, experimentally derivated for the Foldarap, and it seems great so far.
I'll probably make more geared extruder thanks to it, keep making them !
[www.flickr.com]
about // liberapay // flickr // wiki // thingiverse - github
I'll probably make more geared extruder thanks to it, keep making them !
[www.flickr.com]
about // liberapay // flickr // wiki // thingiverse - github
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... July 22, 2013 12:17PM |
Registered: 11 years ago Posts: 65 |
Thank you - I will make the hobbed bolts also in the future!
Good news to everyone: all hobbed bolts (M6, M8 and MiniExtruder) are back in stock on eMAKERshop (http://www.emakershop.com/Seller=2273).
Happy printing!
3D Andy
Good news to everyone: all hobbed bolts (M6, M8 and MiniExtruder) are back in stock on eMAKERshop (http://www.emakershop.com/Seller=2273).
Happy printing!
3D Andy
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... August 05, 2013 05:37PM |
Registered: 11 years ago Posts: 65 |
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... August 28, 2013 03:39AM |
Registered: 11 years ago Posts: 65 |
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... September 13, 2013 02:09PM |
Registered: 11 years ago Posts: 65 |
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... October 11, 2013 03:14PM |
Registered: 11 years ago Posts: 65 |
Hi everyone,
I have put some pictures of my printed parts online. In full resolution - so you can see the quality of the prints. Just have a look at http://www.flickr.com/photos/3d_andy/sets/72157636249492735/
Best wishes
3D Andy
I have put some pictures of my printed parts online. In full resolution - so you can see the quality of the prints. Just have a look at http://www.flickr.com/photos/3d_andy/sets/72157636249492735/
Best wishes
3D Andy
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... October 22, 2013 02:22PM |
Registered: 11 years ago Posts: 65 |
Printed parts for RepRapPro Extruder Drives are available again!
Soon back in stock: "Prusa i2" and "Huxley LM6UU" printed parts sets.
Check http://www.emakershop.com/Seller=2273
Happy printing!
3D Andy
Soon back in stock: "Prusa i2" and "Huxley LM6UU" printed parts sets.
Check http://www.emakershop.com/Seller=2273
Happy printing!
3D Andy
|
[everywhere] printed parts, extruder drives, hobbed bolts, hardware kits, ... December 11, 2013 03:38PM |
Registered: 11 years ago Posts: 65 |
Hi everyone!
Good news: "Tricolour Mendel", "Prusa i2" and "Huxley LM6UU" printed parts sets are ready for shipping again!
Also available: RepRapPro-Style extruder drives for Nema14 or Nema17 stepper motors - also with complete hardware!
Take a look at: http://www.emakershop.com/Seller=2273
Best wishes
3D Andy
Edited 1 time(s). Last edit at 12/11/2013 03:40PM by 3D Andy.
Good news: "Tricolour Mendel", "Prusa i2" and "Huxley LM6UU" printed parts sets are ready for shipping again!
Also available: RepRapPro-Style extruder drives for Nema14 or Nema17 stepper motors - also with complete hardware!
Take a look at: http://www.emakershop.com/Seller=2273
Best wishes
3D Andy
Edited 1 time(s). Last edit at 12/11/2013 03:40PM by 3D Andy.
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... January 05, 2014 04:31AM |
Registered: 11 years ago Posts: 65 |
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... February 08, 2014 02:53AM |
Registered: 11 years ago Posts: 65 |
Ready for shipping: a new batch of hobbed bolts for MiniExtruder / RepRapPro-Extruders!
If you need some special printed parts (for example for a printer-type not listed on emakershop) - please drop a short message to me!
Take a look at: http://www.emakershop.com/Seller=2273
Thank you very much and best wishes
3D Andy
If you need some special printed parts (for example for a printer-type not listed on emakershop) - please drop a short message to me!
Take a look at: http://www.emakershop.com/Seller=2273
Thank you very much and best wishes
3D Andy
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... March 06, 2014 02:11PM |
Registered: 11 years ago Posts: 65 |
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... March 22, 2014 08:17AM |
Registered: 11 years ago Posts: 65 |
Check out my lowered prices for printed parts sets!!!
Thank you for your visit at http://www.emakershop.com/Seller=2273
Best wishes and happy printing
3D Andy
Thank you for your visit at http://www.emakershop.com/Seller=2273
Best wishes and happy printing
3D Andy
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... May 30, 2014 10:49AM |
Registered: 11 years ago Posts: 65 |
Hello!
Just want to inform you: now also available: Cyclon PCB Factory printed parts set. Take a look at emakershop or drop a PM!
Thanks!
3D Andy
Just want to inform you: now also available: Cyclon PCB Factory printed parts set. Take a look at emakershop or drop a PM!
Thanks!
3D Andy
|
Re: [worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ... August 19, 2014 05:18PM |
Registered: 11 years ago Posts: 65 |
Sorry, only registered users may post in this forum.