Welcome! Log In Create A New Profile

Advanced

Charlie's 3D Technologies

Posted by CharlieSteurbaut 
Forum List Message List New Topic
CharlieSteurbaut
Charlie's 3D Technologies
February 02, 2013 09:14AM
Hello!

I'm proud to present to you that we will launch a new webshop Charlie's 3D Technologies in two weeks from now!

The shop is located in belgium and we are a new 3D printer webshop. So in the coming months there will be more products and stuff added to the site.

If you need something that is not on the site you can always contact us! (charlies3dtechnologies@gmail.com)

We hope to contribute to the Reprap Comunity and that we will have a lot of happy customers.

Edited 2 time(s). Last edit at 02/02/2013 09:17AM by CharlieSteurbaut.

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
February 14, 2013 08:47AM
The webshop is online!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
February 17, 2013 08:11AM
If happy to hear your thoughts about the new webshop!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
February 18, 2013 04:07AM
Full prusa mendel i2 kit available also!

Check it out!

Prusa mendel i2 kit

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
February 24, 2013 10:11AM
Some discount on the Nema17 motors!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
March 01, 2013 06:40AM
There are now 10 collors of ABS filament available!

Check it out!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
March 07, 2013 10:56AM
PLA 3 mm comming online soon!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
Karl88
Re: Charlie's 3D Technologies
March 09, 2013 06:36AM
Hi Charlie,
when i look trough your webshop i can only think

"Again a new chinese webstore located in europe"

I dont like that!

sad smiley
Reply Quote
Karl88
Re: Charlie's 3D Technologies
March 09, 2013 06:38AM
Ah i forgot to say:

Please stop post every day here something only to get a higher position in the ranking sad smiley
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
March 09, 2013 06:41AM
Karl88 Every one has his opinion and i'm wondering why you are breaking down my webshop?

Charlie

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
snoopy
Re: Charlie's 3D Technologies
March 09, 2013 06:04PM
Don't quit your day job. Reprap is going down hill. The best you can do is approach this as a hobby.
Reply Quote
yydoctt
Re: Charlie's 3D Technologies
March 09, 2013 06:50PM
snoopy Wrote:
-------------------------------------------------------
Reprap is going down hill.

I'm trying to decide whether its naivety or plain stupidity that led you to that opinion confused smiley Either way, I'm impressed.
Reply Quote
snoopy
Re: Charlie's 3D Technologies
March 09, 2013 07:10PM
You're obviously retarded.. I won't respond to your opinion any further.
Reply Quote
chris33
Re: Charlie's 3D Technologies
March 23, 2013 03:45PM
To be honest snoopy and karl your opinions shud be kept out the thread
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
April 21, 2013 11:49AM
If you are searching for GT2 pulleys and belts you can have a look on my webshop.

Have some new GT2 pulleys and next week some GT2 belts.

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
andre.vs
Re: Charlie's 3D Technologies
April 30, 2013 04:17PM
Hi,

Located in Belgium, I didnt find a lot of places to buy that kind of hardware
So, was happy to discover charlie's site and was happy about his products and his reactivity about my questions

Only want to encourage him
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
May 09, 2013 05:25AM
We have some heater Cartridges on our shop as well now. New products are added each week.

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
May 27, 2013 05:22AM
New alu GT2 pulleys in stock! Also a new batch of ABS and PLA is in!!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
May 30, 2013 10:28AM
The full prusa kits are back in stock!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
June 06, 2013 12:18PM
We have a Raibow pack of PLA and ABS filament.

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
June 18, 2013 05:54AM
New batch of filament available again!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
July 02, 2013 02:29AM
Some full kits are available again. And the prusa i3 kit will be online in 2-3 weeks!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
July 17, 2013 12:58PM
Some Original Prusa i3 alu frames in black an blue available now!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
July 18, 2013 08:13AM
If you buy for 50 euro on our shop you can use the following coupon to get a free SDRamps!
Coupon Code: CHARLIES3DT2013002

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
August 01, 2013 04:00AM
We are back from vaction so we are up and running again use the coupon code to get a free SD card reader!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
August 27, 2013 02:41AM
Also here an anounce to our new Prusa i3 printer.

Check our webshop for more info!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
September 17, 2013 02:43AM
We have some new LCD screens in our range. And we have a lot of prusa i3 back in stock!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
October 14, 2013 04:55PM
The prusa i3 kits are back in stock. Check thel out on our site!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
October 22, 2013 06:14AM
The italian manual is almost ready!

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
CharlieSteurbaut
Re: Charlie's 3D Technologies
November 03, 2013 08:55AM
The italian manual is available on our dropbox! Take a look: [www.dropbox.com]

www.facebook.com/Charlies3DTechnologies
www.charlies3dtechnologies.com/webshop
webshop@charlies3dt.com
Reply Quote
Page 1 of 2    Pages: 12Next
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login