Monotronics Board for Sale
March 29, 2012 05:09AM
[www.ebay.com]

100% Brand new still in plastic. Everything you need. Just hook up your hot end and stepper motors and you're ready to go.

I received this as a replacement for a faulty board, in the mean time I had already made the switch to RAMPS 1.4. So I have no use for this. Let me know if there are any questions. Thanks!
Re: Monotronics Board for Sale
March 29, 2012 05:21AM
Do you provide the temperature control daugther board along with it ?

And IMO that's a lil expensive for that old design.


Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Re: Monotronics Board for Sale
March 29, 2012 05:43AM
Yes, the daughter board and cable to connect them is all included. A starting bid of $80 is less than half of what they sell for brand new. ($178)
Re: Monotronics Board for Sale
March 29, 2012 06:12AM
Thanks for the confirmation on the daughter board.


Yes I know it's quite expensive when new, but as it's a quite outdated design, if you really want it to sell, you'd better lower the price so it can compete with "nowadays" electronics which do more and better.

This card has no microstepping, making the motors quite noisy.
You're getting stuck with old 5D firmware if you don't do electronics modifications.
etc...

People can buy sanguinololus and 4 stepsticks for around 100$, so IMO you may have to lower a bit more if you want to sell.


Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.
Sorry, only registered users may post in this forum.

Click here to login