I am a new one for the 3D printer. I am looking for the conductive material, and the material could use 3mm Extruder, do you have some suggestion? Could you help me?

I am a new one for the 3D printer. Our printer is used to print electronic components. I am looking for the conductive material, and the material could use 3mm Extruder, do you have some suggestion? Could you help me?

I've seen once a 3D printer using a pen to push some tin-lead to make a circuit board. But it not 3mm at all, I think it was 0.5mm

You can also try some carbon doped material, I think it should be coming soon.

Beside from this, you can make your own design.

Thanks, how to make my own design? where I can buy the materials?

Search "conductive filament" on Google.com. It comes up with a ton of results. Although, most conductive filament isn't great for electronics; it depends a lot on the complexity of the object and how much electricity runs through it. If you're trying to make circuit boards, 3D printing is really not the best way.

---

Footle sells filament by the yard to make 3D printing more available to everyone!

Support Footle's crowdfunding campaign! [www.indiegogo.com]
(^WOOD-COMPOSITE filament for $0.50/yard! THERMOCHROMIC for just $0.40!!!)

Sign up for updates here: [goo.gl]
Like us on Facebook! [www.facebook.com]

Quote
yyiiwei
I am a new one for the 3D printer. Our printer is used to print electronic components. I am looking for the conductive material, and the material could use 3mm Extruder, do you have some suggestion? Could you help me?

Hi Currently when we talking about conductive filament, we mean ABS filament. See the conductive ABS information below. Can it meet your requirement?


Properties Test Standard Test Condition S.I. Unit Typical Value
Mechanical
Tensile Strength ISO 527-2 50mm/min Mpa 24
Percent Elongation at break ISO 527-2 50mm/min % 10
Flexural Strength ISO 178 2mm/min Mpa 45
Flexural Modulus ISO 178 2mm/min Mpa 2000
Izod Notchec Impact Strength ISO 180 23℃ kJ/m2 9
Thermal
Temperature of Deflection under Load ISO 75-2 1.8Mpa ℃ 38
Electrical
Surface Resistivity ASTM D257 ~ Ohm 103~105
Others
Density ISO 1183-1 23℃ g/cm3 1.15
Melt Mass-flow Rate(MFR) ISO 1133-1 200℃,5Kg g/10min 10
Flammability UL94 3.00mm Class HB

---

China 3D Printing Filament Factory
0.05mm Tolerance/22 Colors/ Fast Delivery
Ana Lucia
Tel:0086-13418510805
www.ecoreprap.com
skype:ecoreprap

Better send you the attachment.