Welcome! Log In Create A New Profile


Smoothie and extruders

Posted by revinval 
Smoothie and extruders
August 02, 2017 04:40PM
I am having a problem with my extruders while printing and only while printing. I can move my extruders via pronterface interface yet when I try and print nothing is happening or the wrong extruder is on. I am even unable to only slice a single extruder printer setting (all I have tried is one extruder at a time no matter if I told my slicer that my printer has 2 or 1 extruder) . Is there a start Gcode I need to input to make dual extruders work? Or do I need to name them in the config file as I see the hot ends and bed both have associated names and the extruders do not. If anyone has experience with this problem help would be greatly appreciated. I am using CURA as my slicer and a dual motor dual hot end extruder setup (hot ends work perfect).
Re: Smoothie and extruders
October 13, 2017 05:03AM
; Default start code
G28 ; Home extruder
M107 ; Turn off fan
G90 ; Absolute positioning
M82 ; Extruder in absolute mode
; Activate all used extruder
{IF_EXT0}M104 T0 S{TEMP0}
{IF_EXT1}M104 T1 S{TEMP1}
G92 E0 ; Reset extruder position
; Wait for all used extruders to reach temperature
{IF_EXT0}M109 T0 S{TEMP0}
{IF_EXT1}M109 T1 S{TEMP1}

[cifero.ru] - Chimera Steel
Sorry, only registered users may post in this forum.

Click here to login