Welcome! Log In Create A New Profile

Advanced

Duet WiFi - problems with interpolation.

Posted by Treito 
Duet WiFi - problems with interpolation.
January 21, 2018 02:51AM
Hello,

when I enable interpolation the stepper motors stutters at small moves especially the Extruder always and the others for example at the front of the 3DBenchy.
Are the motors not compatible or is there another problem?
The motors wer equipped with the Micromake D1.

Best regards,

Sven


Slicer: Simplify3D 4.0; sometimes CraftWare 1.14 or Cura 2.7
Delta with Duet-WiFi, FW: 1.20.1RC2; mini-sensor board by dc42 for auto-leveling
Ormerod common modifications: Mini-sensor board by dc42, aluminum X-arm, 0.4 mm nozzle E3D like, 2nd fan, Z stepper nut M5 x 15, Herringbone gears, Z-axis bearing at top, spring loaded extruder with pneumatic fitting, Y belt axis tensioner
Ormerod 2: FW: 1.19-dc42 on Duet-WiFi. own build, modifications: GT2-belts, silicone heat-bed, different motors and so on. Printed parts: bed support, (PSU holder) and Y-feet.
Ormerod 1: FW: 1.15c-dc42 on 1k Duet-Board. Modifications: Aluminium bed-support, (nearly) all parts reprinted in PLA/ ABS, and so on.
Sorry, only registered users may post in this forum.

Click here to login