I finally managed to get back to working on my rostock v2 and the extruder is acting weird.
It extrudes fine to start with and as it goes it extrudes less and less until it just chews up the filament and stops extruding
Any Ideas? I believe it has something to do with the amount of pressure building up in the hot end.
Here is my config.g file
config.zip
(1.66 Ki
Not downloaded yet
Machines:
Rostock V2 Meanwell SP 750-24 Power Supply,710n Nano W/l Router,E3D Chimera Hot-End,713 Maker Effector and Hot-End Mount,Duet 0.8.5,Bondtech QR Extruder,PanelDue W/ 7 Inch T/S,Mini IR Height Sensor,24V Heated Bed With SSR,46 Quart Dry Box.
Edited 1 time(s). Last edit at 10/01/2017 02:58PM by Northspire.