Hi!
I use the following hardware:
Anet AM8
MKS Gen 1.4 board
TMC2130 drivers for X, Y and E (X and Y at 700mA RMS, E at 650mA RMS)
At the moment I am using Marlin bugfix-1.1.x (b0f148f, 2018-01-25) and my problem is, that my X axis (not the extruder!) is clattering like crazy when printing the first 1-2 layers. It sounds like the timing belt jumps over the teeth but it isn't. At higher levels it it very silent. What is causing this?
Please have a look at this
video.
Thank you!!