Welcome! Log In Create A New Profile

Display problem on reprapdiscount full graphic smart controller display.

Posted by hardy8

hardy8

Display problem on reprapdiscount full graphic smart controller display.
December 05, 2017 04:06AM

Registered: 6 years ago
Posts: 5

I have update my ramps 1.4 board with the latest Marlin firmware, but now in the menu choice there is no switch off the text from white on black, there is only a frame around it, it is therefore much less clear what you choose.
I can not find it anywhere where this should happen in Marlin. I think "u8g.setColorIndex(0)" will not work, how can I fixit? Hardy

Hardy

Edited 1 time(s). Last edit at 12/05/2017 05:57AM by hardy8.

Reply Quote

obewan

Re: Display problem on reprapdiscount full graphic smart controller display.
December 05, 2017 06:08AM

Registered: 7 years ago
Posts: 759

On the back of the display board should be a contrast adjustment ,try altering that.

Reply Quote

hardy8

Re: Display problem on reprapdiscount full graphic smart controller display.
December 05, 2017 09:53AM

Registered: 6 years ago
Posts: 5

That's not the problem, its show a fine contrast, in the previous marlin version, it was okay.(that adjustment was the first thing I did),

Reply Quote

hardy8

Re: Display problem on reprapdiscount full graphic smart controller display.
December 05, 2017 01:14PM

Registered: 6 years ago
Posts: 5

I found the solution by myself, in the "configuration_adv.h" make comment (place two slashes) "#define XYZ_HOLLOW_FRAME" and also "#define MENU_HOLLOW_FRAME"

Hardy