MKS genv1.4 with TFT32. single head.
Both the bed and head temperature show as the same on the TFT32.
Which ever one rises it shows the highest temperature.
100K on bed. no pull up.
100k glass bead on head, no pull up.
It has been working, but I fitted new steppers, and fault appeared,
checked resistances and both are ok.
plugged 2 new sensors on the motherboard, same results.
bed in middle position (white).
head in top position (black).
reloaded the tft32.
reloaded the marlin.ino
config file attached.
cofig.txt
