Welcome! Log In Create A New Profile

Advanced

Anyone know which board to choose for this?

Posted by totalitarian 
Forum List Message List New Topic
totalitarian
Anyone know which board to choose for this?
September 30, 2017 02:10PM
[www.amazon.co.uk]


more details here

[www.aliexpress.com]

Which option do I pick from boards.h?

Edited 1 time(s). Last edit at 09/30/2017 02:14PM by totalitarian.
Reply Quote
Roxy
Re: Anyone know which board to choose for this?
September 30, 2017 03:20PM
The write up says it is RAMPS v1.4 compatible. So I would try one of the RAMPS type declarations. If you have one extruder, a fan, and a heated bed, I would use:

#define MOTHERBOARD BOARD_RAMPS_14_EFB
Reply Quote
totalitarian
Re: Anyone know which board to choose for this?
September 30, 2017 03:32PM
THanks, it also mentions MKS Gen compatible. So maybe BOARD_MKS_13 will work?
Reply Quote
Roxy
Re: Anyone know which board to choose for this?
September 30, 2017 05:04PM
MKS Gen boards are RAMPS v1.4 compatible. So that probably will work too. Just pick one.... and see if everything moves correctly and the heaters work right.
If something doesn't work right, you can go after that one thing and change pin definitions.
Reply Quote
totalitarian
Re: Anyone know which board to choose for this?
September 30, 2017 05:19PM
I'll give that a go thanks
Reply Quote
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login