Looking for some help understand a ZMIN ENDSTOP issue. February 08, 2017 07:35AM |
Registered: 7 years ago Posts: 19 |
#define FIX_MOUNTED_PROBE #define X_PROBE_OFFSET_FROM_EXTRUDER 28 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -0.55 // Z offset: -below +above [the nozzle] #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points
G1 Z0.400 F18000.000 ; move to next layer (0) G1 E-1.00000 F600.00000 ; retract G92 E0 ; reset extrusion distance G1 Z0.900 F18000.000 ; lift Z G1 X40.827 Y43.873 F18000.000 ; move to first skirt point G1 Z0.400 F18000.000 ; restore layer Z
G28 M114 X:64.00 Y:85.00 Z:2.55 E:0.00 Count A: 11920 B:-1680 Z:1020 G90 G1 Z0.4 M114 X:64.00 Y:85.00 Z:0.40 E:0.00 Count A: 11920 B:-1680 Z:160
23:13:35.499: G29 Auto Bed Leveling 23:14:04.695: Bilinear Leveling Grid: 23:14:04.695: 0 1 2 23:14:04.695: 0 -0.03 -0.24 -0.49 23:14:04.695: 1 +0.15 +0.01 -0.08 23:14:04.695: 2 +0.23 +0.13 +0.06
23:37:07.274: M48 Z-Probe Repeatability Test 23:37:36.146: Finished! 23:37:36.150: Mean: 0.524750 Min: 0.523 Max: 0.525 Range: 0.002 23:37:36.150: Standard Deviation: 0.000750
Re: Looking for some help understand a ZMIN ENDSTOP issue. February 08, 2017 09:39AM |
Registered: 8 years ago Posts: 552 |
[SOLVED] Looking for some help understand a ZMIN ENDSTOP issue. February 08, 2017 03:15PM |
Registered: 7 years ago Posts: 19 |