Auto Bed Leveling Setup issues - I don't understand :-( January 03, 2017 12:59PM |
Registered: 7 years ago Posts: 45 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 03, 2017 02:09PM |
Registered: 8 years ago Posts: 552 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 03, 2017 04:06PM |
Registered: 7 years ago Posts: 45 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 03, 2017 04:15PM |
Registered: 8 years ago Posts: 552 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 03, 2017 09:22PM |
Registered: 7 years ago Posts: 45 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 04, 2017 12:06AM |
Registered: 8 years ago Posts: 552 |
Quote
imwhoim54
Hi Roxy!
Thanks SO much for your help! I still don't understand the math behind how it arrives at the points to check, but your information cleared a LOT up in my mind as to how things are adjusted! I made some general entries using your information that got me into the ballpark the slowly changed the values until they wouldn't work any more OR landed on the areas I wanted to test!
Quote
imwhoim54
Now, Have to level the bed properly to get the nozzle to the right height and place glass on it to set my printing surface. I usually use(d) glass with metal duct tape on the surface to provide the inductive reaction. This seems to be working well but I need to predict where the probe will be on each one of the corners so that I can stick the tape down.
Quote
imwhoim54
Alternative here (which I'll probably do) is to run the bed leveling a couple of times and try to capture the numbers on the display as they whizz by! LOL
But once again... thanks so much for your help!
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 04, 2017 06:20AM |
Registered: 7 years ago Posts: 759 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 04, 2017 01:29PM |
Registered: 7 years ago Posts: 45 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 04, 2017 02:33PM |
Registered: 8 years ago Posts: 29 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 04, 2017 03:41PM |
Registered: 7 years ago Posts: 759 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 04, 2017 04:07PM |
Registered: 7 years ago Posts: 45 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 05, 2017 10:01AM |
Registered: 8 years ago Posts: 552 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 05, 2017 01:22PM |
Registered: 10 years ago Posts: 770 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 07, 2017 05:52PM |
Registered: 7 years ago Posts: 45 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 09, 2017 09:20AM |
Registered: 10 years ago Posts: 770 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 09, 2017 12:40PM |
Registered: 7 years ago Posts: 45 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 09, 2017 04:30PM |
Registered: 8 years ago Posts: 552 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 09, 2017 10:14PM |
Registered: 7 years ago Posts: 45 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 10, 2017 03:12PM |
Registered: 10 years ago Posts: 770 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 11, 2017 12:07PM |
Registered: 7 years ago Posts: 45 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 11, 2017 02:42PM |
Registered: 7 years ago Posts: 759 |
Re: Auto Bed Leveling Setup issues - I don't understand :-( January 13, 2017 12:25AM |
Registered: 7 years ago Posts: 45 |