Hello,
I Use Marlin RC7. In the confi.h-file under the section "PID > Bed Temperature Control" is the following function:
Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
#define BED_LIMIT_SWITCHING
Bang-bang is activated, so PID is disabled. What does the #define BED_LIMIT_SWITCHING function do?
And what's the difference too not enabling it?
Thanks!
Greetings,
Hans
Edit: Wrong language.
Edited 1 time(s). Last edit at 12/21/2016 04:05PM by h4nc.
