You need to re setup X0
Home X, where is the nozel? I suspect its now at -10
Set this in configuration.h
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS -10
#define Y_MIN_POS 0
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
Edited 1 time(s). Last edit at 02/03/2018 07:12PM by Dust.