Thought I would share my initial results on printing with black Verbatim filament purchased from RS-Online.
A quick heads up while RS-Online state it is in stock with 2-3 days delivery they don't actually stock it in NZ. Upon placing my order it took over a week to get here and came from the UK.
Initially tests consistently failed so badly I thought something was wrong with my printer. The filament refused to stick or would bend really badly. I switched back to some ABS from DiamondAge and it printed fine so I concluded it was my settings.
After many unrelated frustrations (I had moved and modified my printer) my findings / settings for the black verbatim filament that are working are:
- Print slowly - it is softer and stripped in my extruder with the slightest resistance or trying to print too fast.
- it required a very hot end for the first layer at 255 then I dropped it to 240
- it required a very hot heatbed for the first layer at 115 then I dropped it to105 for subsequent layers.
This produced good results, no bending and just enough stick. I print directly onto glass with no slurry.
Edited 2 time(s). Last edit at 12/26/2014 05:23AM by AgentX.