Welcome! Log In Create A New Profile

Advanced

Double check M665 line in config.g before uploading it.

Posted by janpenguin 
Double check M665 line in config.g before uploading it.
September 25, 2016 09:22PM
Hi,

I could've literally destroed Metal Fisher by uploading config.g that contains broken M665 command arguments.
The line was M665 160.00 R81.08 B75.00 H177.58 . It changed Fisher's mode as Cartesian not Delta implicitly by mistake.
Homing all was pushing the nozzle off the print bed.
Reset and power cycle, rebooting wouldn't fix it.
Gcode console didn't show any error messeages either.

Out of frustration I typed M665 in Gcode console,
"Printer is not in delta mode."
And my immediate thought 'What?! How could it be Cartesian'

I checked the wiki page and it says M665 command changes Cartesian to Delta mode.

Uploading config.g that has correct M665 command fixed the problem.
M665 L160.00 R81.08 B75.00 H177.58
Re: Double check M665 line in config.g before uploading it.
May 25, 2017 12:41PM
Ignore this, put it in the wrong subject feed.

Edited 1 time(s). Last edit at 05/25/2017 12:43PM by moggymoo.
Sorry, only registered users may post in this forum.

Click here to login