Welcome! Log In Create A New Profile

bed leveling help

Posted by daveb693

daveb693

bed leveling help
November 04, 2017 10:37AM

Registered: 11 years ago
Posts: 5

im looking for a tutorial or thread to set up auto bed leveling on i3 using inductive sensor
i got it ruuning on 1.0.2 but iwant to upgrade to 1.1.6 but theres a few changes to bed leveling
thanks in advance

Reply Quote

Roberts_Clif

Re: bed leveling help
November 04, 2017 01:39PM

Registered: 6 years ago
Posts: 1,863

I would open both is side by side windows and transfer your changes from 1.0.2 to 1.1.6.

However 1.1.5 is more stable in my opinion. What changes in particular are you needing help with.

Reply Quote

tjnamtiw

Re: bed leveling help
November 28, 2017 03:18PM

Registered: 8 years ago
Posts: 541

Quote
Roberts_Clif
I would open both is side by side windows and transfer your changes from 1.0.2 to 1.1.6.

However 1.1.5 is more stable in my opinion. What changes in particular are you needing help with.

Download and use WINMERGE.

Folger Tech 2020 i3 and FT-5 as well as modified JGAurora A5 with direct drive E3D/Titan. All running the BLTOUCH.
Great kits. Having fun and running the heck out of them.
Running Marlin 1.1.0 RC8 on the i3 and FT5. Custom firmware on A5.
Folger Tech Wiki board >[folgertech.wikia.com]

Reply Quote

Roberts_Clif

Re: bed leveling help
November 28, 2017 07:52PM

Registered: 6 years ago
Posts: 1,863

Quote
tjnamtiw

Quote
Roberts_Clif
I would open both is side by side windows and transfer your changes from 1.0.2 to 1.1.6.

However 1.1.5 is more stable in my opinion. What changes in particular are you needing help with.

Download and use WINMERGE.

Thank You

Did not know WINMERGE existed.
This will make helping individuals a lot easier.

Edited 3 time(s). Last edit at 11/28/2017 08:03PM by Roberts_Clif.

Reply Quote

TheLastSaxon

Re: bed leveling help
December 08, 2017 12:20AM

Registered: 6 years ago
Posts: 3

this is what i use.....

[github.com]

i found it immensely useful

Reply Quote

tbeaulieu

Re: bed leveling help
March 15, 2018 06:57PM

Registered: 6 years ago
Posts: 24

Personally I mark every change I make in my .h files. I find it crazy helpful to cycle through my changes with F3 because I'm often reviewing and tweaking.