Welcome! Log In Create A New Profile

Advanced

bed leveling help

Posted by daveb693 
bed leveling help
November 04, 2017 07:37AM
im looking for a tutorial or thread to set up auto bed leveling on i3 using inductive sensor
i got it ruuning on 1.0.2 but iwant to upgrade to 1.1.6 but theres a few changes to bed leveling
thanks in advance
Re: bed leveling help
November 04, 2017 10:39AM
I would open both is side by side windows and transfer your changes from 1.0.2 to 1.1.6.

However 1.1.5 is more stable in my opinion. What changes in particular are you needing help with.
Re: bed leveling help
November 28, 2017 12:18PM
Quote
Roberts_Clif
I would open both is side by side windows and transfer your changes from 1.0.2 to 1.1.6.

However 1.1.5 is more stable in my opinion. What changes in particular are you needing help with.

Download and use WINMERGE.


Folger Tech 2020 i3 and FT-5. Both running the BLTOUCH.
Great kit. Having fun and running the heck out of it.
Running Marlin 1.1.0 RC8 on the i3 and 1.0.2 on the FT5.
Folger Tech Wiki board >[folgertech.wikia.com]
Re: bed leveling help
November 28, 2017 04:52PM
Quote
tjnamtiw
Quote
Roberts_Clif
I would open both is side by side windows and transfer your changes from 1.0.2 to 1.1.6.

However 1.1.5 is more stable in my opinion. What changes in particular are you needing help with.

Download and use WINMERGE.

Thank You

Did not know WINMERGE existed.
This will make helping individuals a lot easier.

Edited 3 time(s). Last edit at 11/28/2017 05:03PM by Roberts_Clif.
Re: bed leveling help
December 07, 2017 09:20PM
this is what i use.....

[github.com]

i found it immensely useful
Sorry, only registered users may post in this forum.

Click here to login