Welcome! Log In Create A New Profile

Advanced

Reprap Prusa i3 Rework Ready Marlin Firmware

Posted by Golemanov 
Reprap Prusa i3 Rework Ready Marlin Firmware
March 05, 2017 07:52AM
Hello Reprap fans.
Before a week ago I built my Reprap Rework. But for this week I cant deal with the Arduino code ... Can somebody give me the ready Marlin collection? The Configuration.h is the hardest thing.
Re: Reprap Prusa i3 Rework Ready Marlin Firmware
March 06, 2017 07:35PM
If it's a scratch build then you need to figure out most of the values yourself.
Depends on pulley size, belt type, z-axis threaded rods, extruder type etc etc

These are my notes from a recent build:
[www.instructables.com]

Steve
Re: Reprap Prusa i3 Rework Ready Marlin Firmware
March 14, 2017 03:24AM
Quote
SteveRoy
If it's a scratch build then you need to figure out most of the values yourself.
Depends on pulley size, belt type, z-axis threaded rods, extruder type etc etc

These are my notes from a recent build:
[www.instructables.com]

Steve
Hello, Steve
I`ve done everything same as described in the link, but again nothing! When I upload on the Arduino the code and try to move for example 10mm from the pronterface X-axis ... nothing moves sad smiley Before a couple of days I upload one Marlin Ready code. With this build the motors worked but they didnt syncronized well so my motors are working and well connected. Any other suggestions? Thank you very much!
Sorry, only registered users may post in this forum.

Click here to login