Nuts/Bolts/Washers needed for vanila Prusa i3?

as in title
[reprap.org] are the numbers posted in this wiki right?

Probably, but it's always a good thing to have spares. I'd get 100 of all M3 parts and 25% extra for M4, M5 and M8. It's also handy to have in your sorting box for projects, building a spool holder etc. Same goes for spare bearings etc. You can make a spool holder with 608 bearings for example.

Here's a BOM for vanilla i3 single plate that I've been using for a few years now. The BOM has been used on over 1000 builds.

12 x M10-1.50 nut, zinc
12 x M10 flat washer, zinc

34 x M8-1.25 nut, zinc
34 x M8 flat washer, zinc

4 x M5-0.8 nut, zinc

50 x M3-0.5 nut, zinc
50 x M3 flat washer, zinc
12 x M3-0.5 nyloc nut, zinc

24 x M3-0.5 x 10mm socket head cap screw, black oxide
10 x M3-0.5 x 15mm socket head cap screw, black oxide
16 x M3-0.5 x 20mm socket head cap screw, black oxide
5 x M3-0.5 x 35mm socket head cap screw, black oxide
3 x M3-0.5 x 40mm socket head cap screw, black oxide
3 x M3-0.5 x 8mm socket head set screw, black oxide
1 x M8-1.25 x 20mm socket head set screw, black oxide

---

Dave
Roaddog Labs Ltd
Las Vegas USA
roaddoglabs.io