Welcome! Log In Create A New Profile

geeetech i3 pro c connecting lcd panel

Posted by i3proc

i3proc

geeetech i3 pro c connecting lcd panel
September 14, 2015 05:16AM

Registered: 8 years ago
Posts: 1

hello,

i got this printer one week ago.
i installed everything except the two data cable, on for lcd and one for sd card.
on the print board i see the marking but on the lcd panel there is no marking, where do i plug them in so i don't mix them up

also the printer has an sd card slot where can i find this don't see it

thanks

Reply Quote

sarf2k4

Re: geeetech i3 pro c connecting lcd panel
September 17, 2015 08:31AM

Registered: 9 years ago
Posts: 476

You won't break the lcd if you switched between sd and lcd wires. But from my experience, these geeetech based boards, gt2560, sanguino also, literally its somewhat the pins are mapped or switched for their own product especially the lcd from their product lines only