Graber i3 Questions
Posted by Xecut0r
|
Graber i3 Questions June 29, 2015 07:57AM |
After lots of messing around all sorts of problems I have manged to temporary rig this graber, It homes ok test run some gcode.
My endstops are the best placement, I could do
What I need to print
endstop holders
belt holders
lm8uu pillow blocks
compact extruder / swap to all metal hotend
reel holder
All I have is nylon black, 3.00 and 1.75 210~260 deg, Is nylon good enough, do I need abs for extruders?
p55nf06 mosfet heats like crazy If I turn the heatbed on, It has a copper heatsink and fan, I'm waiting on x10 IRLB8743 TO-220 from china, Does maplin.co.uk have any transistor which would work as a replacement?
My endstops are the best placement, I could do
What I need to print
endstop holders
belt holders
lm8uu pillow blocks
compact extruder / swap to all metal hotend
reel holder
All I have is nylon black, 3.00 and 1.75 210~260 deg, Is nylon good enough, do I need abs for extruders?
p55nf06 mosfet heats like crazy If I turn the heatbed on, It has a copper heatsink and fan, I'm waiting on x10 IRLB8743 TO-220 from china, Does maplin.co.uk have any transistor which would work as a replacement?
Sorry, only registered users may post in this forum.