slicer settings

Hi, I'm using the Geeetech prusa i3
Can some share some good slicer settings for PLA 1.75mm filament?


Thanks you!

This is from the geeetech forums..

Might help

[www.geeetech.com]

Quote
24ariel3
Hi, I'm using the Geeetech prusa i3
Can some share some good slicer settings for PLA 1.75mm filament?


Thanks you!

Using cura:

nozzle size 0.4mm
layer 0.2mm
wall 1.2mm
top/bottom 0.8mm
infill 10-15%
hot end 195-205'c
bed 70'c (smeared with glue stick, uhu/generic)
flow 100%
print speed 60
retract length 1.5
retract speed 150

I don't really follow slicer settings from geeetech, also I would recommend you to do hot end temperature print test, on each layer would reduce the temp by about 5'c. Mine is 195-205'c which I think would be optimal

Hi can you screenshot me all of your cura settings?

Quote
24ariel3
Hi can you screenshot me all of your cura settings?

That's everything that I've given you, other than that is the print size, anything never mentioned are default values