Welcome!
Log In
Create A New Profile
Home
>
RepRap User Groups
>
Asia
>
RepRap Ormerod China
> Topic
Advanced
打印翘边问题
Posted by
xiandhq
Forum List
Message List
New Topic
xiandhq
打印翘边问题
March 09, 2015 05:24AM
Registered: 9 years ago
Posts: 41
这是第一次遇到这样的问题,第一层的时候一切正常,然后就没有注意让他自行打印了,打印完之后才发现背侧的一个角翘边了。
pic1.jpg
pic2.jpg
同时还出现了热端温度在150度到185度之间跳跃的现象。
temp.jpg
Edited 1 time(s). Last edit at 03/09/2015 05:39AM by xiandhq.
Reply
Quote
xiandhq
Re: 打印物表面的波痕问题
March 09, 2015 05:32AM
Registered: 9 years ago
Posts: 41
打印物直径7cm,刚好在热床中央。下面是第二次打印的,在同样的位置出现了问题,第一层没有问题,粘的很牢。出现翘边的位置如下图。
pic3.jpg
Edited 1 time(s). Last edit at 03/09/2015 05:40AM by xiandhq.
Reply
Quote
Newer Topic
Older Topic
Print View
RSS
Sorry, only registered users may post in this forum.
Click here to login