Welcome! Log In Create A New Profile

Advanced

G32

Posted by real 
G32
December 09, 2014 02:36AM
我的机器装配完毕后,进入调试阶段。X Y Z 轴归位都很正常,红外探测读数也正常。但是归位后,当输入G32进行四点校位时,X 和Y 轴就顶在机器的末端不停止(X顶在X轴电机端, Y顶在Y轴电机端)并发出哒哒哒的声音。直到关闭电源它停下来了........我该怎么办?
Re: G32
December 11, 2014 10:20PM
找到答案了,原来是SD卡/sys/config.g出问题了。我将

M557 P0 X45 Y0

M557 P1 X45 Y180

M557 P2 X215 Y180

M557 P3 X215 Y0
改为:
M557 P0 X45 Y0

M557 P1 X45 Y175

M557 P2 X210 Y175

M557 P3 X210 Y0
现在G32可以正常四点校位了,调试成功。可以打印了!!!
hot smiley
Re: G32
December 16, 2014 04:45AM
Re: G32
January 03, 2015 05:34PM
给力。。。hot smiley
Sorry, only registered users may post in this forum.

Click here to login