hi
i want to build printer 3d with lcd2004 kit and ramps 1.4
but when i install the frameware 10 it can't compile or sende to arduino it give me a lot of probleme like this
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Arduino : 1.8.2 (Windows 7), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\Marlin.h:23:0,
from sketch\thermistortables.h:4,
from sketch\Configuration.h:724,
from C:\Users\mohamed\Pictures\printer\Prusa-Firmware-3.0.10-RC1\Prusa-Firmware-3.0.10-RC1\Firmware\Firmware.ino:33:
sketch\pins.h:44:0: warning: "X_MS1_PIN" redefined
#define X_MS1_PIN 40
^
sketch\pins.h:7:0: note: this is the location of the previous definition
#define X_MS1_PIN -1
^
sketch\pins.h:45:0: warning: "X_MS2_PIN" redefined
#define X_MS2_PIN 41
^
sketch\pins.h:8:0: note: this is the location of the previous definition
#define X_MS2_PIN -1
^
sketch\pins.h:51:0: warning: "Y_MS1_PIN" redefined
#define Y_MS1_PIN 69
^
sketch\pins.h:9:0: note: this is the location of the previous definition
#define Y_MS1_PIN -1
^
sketch\pins.h:52:0: warning: "Y_MS2_PIN" redefined
#define Y_MS2_PIN 39
^
sketch\pins.h:10:0: note: this is the location of the previous definition
#define Y_MS2_PIN -1
^
sketch\pins.h:58:0: warning: "Z_MS1_PIN" redefined
#define Z_MS1_PIN 68
^
sketch\pins.h:11:0: note: this is the location of the previous definition
#define Z_MS1_PIN -1
^
sketch\pins.h:59:0: warning: "Z_MS2_PIN" redefined
#define Z_MS2_PIN 67
^
sketch\pins.h:12:0: note: this is the location of the previous definition
#define Z_MS2_PIN -1
^
sketch\pins.h:104:0: warning: "E0_MS1_PIN" redefined
#define E0_MS1_PIN 65
^
sketch\pins.h:13:0: note: this is the location of the previous definition
#define E0_MS1_PIN -1
^
sketch\pins.h:105:0: warning: "E0_MS2_PIN" redefined
#define E0_MS2_PIN 66
^
sketch\pins.h:14:0: note: this is the location of the previous definition
#define E0_MS2_PIN -1
^
In file included from sketch\Marlin.h:23:0,
from sketch\Marlin_main.cpp:38:
sketch\pins.h:44:0: warning: "X_MS1_PIN" redefined
#define X_MS1_PIN 40
^
sketch\pins.h:7:0: note: this is the location of the previous definition
#define X_MS1_PIN -1
^
sketch\pins.h:45:0: warning: "X_MS2_PIN" redefined
#define X_MS2_PIN 41
^
sketch\pins.h:8:0: note: this is the location of the previous definition
#define X_MS2_PIN -1
^
sketch\pins.h:51:0: warning: "Y_MS1_PIN" redefined
#define Y_MS1_PIN 69
^
sketch\pins.h:9:0: note: this is the location of the previous definition
#define Y_MS1_PIN -1
^
sketch\pins.h:52:0: warning: "Y_MS2_PIN" redefined
#define Y_MS2_PIN 39
^
sketch\pins.h:10:0: note: this is the location of the previous definition
#define Y_MS2_PIN -1
^
sketch\pins.h:58:0: warning: "Z_MS1_PIN" redefined
#define Z_MS1_PIN 68
^
sketch\pins.h:11:0: note: this is the location of the previous definition
#define Z_MS1_PIN -1
^
sketch\pins.h:59:0: warning: "Z_MS2_PIN" redefined
#define Z_MS2_PIN 67
^
sketch\pins.h:12:0: note: this is the location of the previous definition
#define Z_MS2_PIN -1
^
sketch\pins.h:104:0: warning: "E0_MS1_PIN" redefined
#define E0_MS1_PIN 65
^
sketch\pins.h:13:0: note: this is the location of the previous definition
#define E0_MS1_PIN -1
^
sketch\pins.h:105:0: warning: "E0_MS2_PIN" redefined
#define E0_MS2_PIN 66
^
sketch\pins.h:14:0: note: this is the location of the previous definition
#define E0_MS2_PIN -1
^
In file included from sketch\SdFile.h:27:0,
from sketch\cardreader.h:8,
from sketch\Marlin_main.cpp:58:
SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'
struct fpos_t {
^
In file included from sketch\Marlin.h:10:0,
from sketch\Marlin_main.cpp:38:
c:\program files\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here
__extension__ typedef long long fpos_t;
^
exit status 1
using typedef-name 'fpos_t' after 'struct'
Ce rapport pourrait être plus détaillé avec
l'option "Afficher les résultats détaillés de la compilation"
activée dans Fichier -> Préférences.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
please i want to solve this problem
i want this version from prusa because it have a lot of setting and option
thank you