Can't compile GCode Interpreter

Hello all,

I am having some problems compiling the FiveD_GCode_Interpreter in the arduino environement (0022).

I have installed the arduino software along with the Sanguino files as described on their website. And when i try and verify/compile the code i get the following error messages:

FiveD_GCode_Interpreter.cpp:32:28: error: HardwareSerial.h: No such file or directory
FiveD_GCode_Interpreter.cpp:34:22: error: WProgram.h: No such file or directory
In file included from FiveD_GCode_Interpreter.cpp:35:
vectors.h: In function 'FloatPoint fabsv(const FloatPoint&)':
vectors.h:59: error: 'fabs' was not declared in this scope
vectors.h: In function 'LongPoint absv(const LongPoint&)':
vectors.h:104: error: 'abs' was not declared in this scope
In file included from FiveD_GCode_Interpreter.cpp:37:
intercom.h: At global scope:
intercom.h:108: error: 'byte' does not name a type
intercom.h:110: error: 'byte' does not name a type
In file included from FiveD_GCode_Interpreter.cpp:39:
extruder.h:12: error: variable or field 'newExtruder' declared void
extruder.h:12: error: 'byte' was not declared in this scope
extruder.h:151: error: 'byte' has not been declared
extruder.h: In constructor 'extruder::extruder(char)':
extruder.h:182: error: 'OUTPUT' was not declared in this scope
extruder.h:182: error: 'pinMode' was not declared in this scope
extruder.h:184: error: 'digitalWrite' was not declared in this scope
extruder.h: In member function 'void extruder::buildNumberCommand(char, int)':
extruder.h:206: error: 'itoa' was not declared in this scope
extruder.h: In member function 'void extruder::valveSet(bool, int)':
extruder.h:220: error: 'delay' was not declared in this scope
extruder.h: At global scope:
extruder.h:223: error: variable or field 'setCooler' declared void
extruder.h:223: error: 'byte' was not declared in this scope
extruder.h: In member function 'int extruder::getTemperature()':
extruder.h:240: error: 'atoi' was not declared in this scope
extruder.h: In member function 'void extruder::setDirection(bool)':
extruder.h:256: error: 'digitalWrite' was not declared in this scope
extruder.h:258: error: 'digitalWrite' was not declared in this scope
extruder.h: In member function 'void extruder::sStep()':
extruder.h:268: error: 'digitalWrite' was not declared in this scope
extruder.h:270: error: 'digitalWrite' was not declared in this scope
extruder.h: In member function 'int extruder::potVoltage()':
extruder.h:293: error: 'atoi' was not declared in this scope
extruder.h: At global scope:
extruder.h:317: error: 'byte' does not name a type
In file included from FiveD_GCode_Interpreter.cpp:40:
cartesian_dda.h:67: error: 'byte' has not been declared
cartesian_dda.h: In member function 'void cartesian_dda::do_x_step()':
cartesian_dda.h:131: error: 'HIGH' was not declared in this scope
cartesian_dda.h:131: error: 'digitalWrite' was not declared in this scope
cartesian_dda.h:133: error: 'LOW' was not declared in this scope
cartesian_dda.h: In member function 'void cartesian_dda::do_y_step()':
cartesian_dda.h:138: error: 'HIGH' was not declared in this scope
cartesian_dda.h:138: error: 'digitalWrite' was not declared in this scope
cartesian_dda.h:140: error: 'LOW' was not declared in this scope
cartesian_dda.h: In member function 'void cartesian_dda::do_z_step()':
cartesian_dda.h:145: error: 'HIGH' was not declared in this scope
cartesian_dda.h:145: error: 'digitalWrite' was not declared in this scope
cartesian_dda.h:147: error: 'LOW' was not declared in this scope
cartesian_dda.h: In member function 'void cartesian_dda::do_e_step()':
cartesian_dda.h:152: error: 'extruder_in_use' was not declared in this scope
cartesian_dda.h: At global scope:
cartesian_dda.h:166: error: 'cartesian_dda::read_switch' declared as an 'inline' variable
cartesian_dda.h:166: error: 'bool cartesian_dda::read_switch' is not a static member of 'class cartesian_dda'
cartesian_dda.h:166: error: 'byte' was not declared in this scope
cartesian_dda.h:167: error: expected ',' or ';' before '{' token
FiveD_GCode_Interpreter:24: error: variable or field 'setTimerResolution' declared void
FiveD_GCode_Interpreter:24: error: 'byte' was not declared in this scope
FiveD_GCode_Interpreter:26: error: 'byte' does not name a type
FiveD_GCode_Interpreter:30: error: variable or field 'newExtruder' declared void
FiveD_GCode_Interpreter:30: error: 'byte' was not declared in this scope
FiveD_GCode_Interpreter:44: error: 'byte' does not name a type
FiveD_GCode_Interpreter:88: error: 'byte' does not name a type
FiveD_GCode_Interpreter:89: error: 'byte' does not name a type
FiveD_GCode_Interpreter:92: error: 'word' does not name a type
FiveD_GCode_Interpreter:101: error: expected constructor, destructor, or type conversion before '(' token



I am assuming all the following error messages are due to the two "missing" .h files.

I use quotation marks because both files are in the ./arduino-0022/hardware/cores/arduino/ directory (and the Sanguino directory).

Any advice would be apreciated.

Cheers,
J. A.

Hi

Try download and use Arduino version 21. Had smilair problems compiling the extruder firmware on version 22.

/Dary

Probably a stab in the dark, but have you set the board to Sanguino in the Arduino IDE?

Tried Three different versions of the arduino softawere...They all get the same error.
And yes, I did set the board to sanguino.

I would actually check to see if you have HardwareSerial.h on your system as that is a core part of the arduino environment. It looks like it is a corrupted environment.

David

It is a corrupted environment indeed! A fresh Arduino reinstall solved similar problem