ANET A8 MARLIN FIRMWARE

Can anyone send me the configuration.h file of Anet A8 3D printer. i tried to configure a lot, its not working.

Here is what I have

thanks brother. Let me see if it works for me :-)

This looks like repetier, will burn in repetier and try.

Arduino: 1.6.5 (Windows 8.1), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

Commands.cpp.o: In function `Commands::processMCode(GCode*)':
C:\Users\ELECTRON\AppData\Local\Temp\build7000101604815640474.tmp/Commands.cpp:2262: undefined reference to `uid'
C:\Users\ELECTRON\AppData\Local\Temp\build7000101604815640474.tmp/Commands.cpp:2262: undefined reference to `uid'
C:\Users\ELECTRON\AppData\Local\Temp\build7000101604815640474.tmp/Commands.cpp:2262: undefined reference to `UIDisplay::executeAction(int, bool)'
collect2.exe: error: ld returned 1 exit status
Error compiling.

This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.

How to update firmware on A8

Edited 2 time(s). Last edit at 04/08/2016 03:25AM by ajaybnl.

Hi broy55,
is this for Melzi board, or Anet3d V1 board, or are the two compatible?
Thank you!

The configuration says #define MOTHERBOARD 63

This is for a melzi

How are you uploading the firmware? Mine wasn't responding to programming over the serial port

Edited 1 time(s). Last edit at 05/30/2016 11:48PM by jgilbs.

Please find attached the default firmware with default configuration file, it compiled correctly on Arduino 1.6.5, but i got timeout() error when i start upload it i used Arduino 1.0.1 and i am still looking for a solution for this problem,

Hi guys.. im the dev behind skynet3d firmware for the anet a8. It is based on marlin v1 and works perfectly on the anet a8.. my v2.is coming out this week and is based on marlin rc7. Go on facebook and add a /skynet3ddevelopment to the url to find us and download. Not sure if i can post links on here but that should be easy enough. Happy printing pete@ skynet3d ;-)

The main reason you are not getting marlin to work from the stock marlin download is down to how anet impliment their version of the melzi board.. the pins are different and they use adckeypad .. skynet solves these issues and works .. i also chose to go with marlin over repetier because the autolevel seems more accurate and controllable . Thanks

Adding support to the main branch at the moment…… [github.com]

---

|
| Lead Developer of Marlin Firmware
| Help support my work at Patreon and Elsewhere.
|