I am having a problem I just bought the "Folger Tech RepRap Aluminum 3D Printer Kit" from 3Dprintersonlinestore ( [
www.3dprintersonlinestore.com] ). I spent hours setting it up exactly as their manual had told me so, and after a days worth of work I made my first print! A small cube as a test, I then went to bed because of how exhausted I was. I came back the next day and started up my computer and my printer. But when I connected my printer to the Repetier Host software the log showed
Error : 0
:extruder switched off. MINETEMP triggered!
printer stopped due to errors use m999 to restart. (Temperature is reset set it after restarting)
Ive looked over some forums and such but I still couldnt figure out how to fix the issue. Apparently its the thermister. But which one? The heated bed thermister? or the extruder thermister? I don't know what to do, It worked last night and now it isn't, so I feel defeated and kinda regretful. Both thermister are pluged into my board in the appropriate spots (The places the manual showed me to plug them in). I can press home X and Y but once I do the print motors lock leaving the extruder in the upper left of the print bed (Stage Right). I cant even move it by hand.