Hello.
I've been using a HICTOP Prusa i3 kit for a few months now and recently started moving on from small prints. One thing I did to accommodate for larger prints is set my bed size in Cura to the actual dimensions instead of the defaults. All my large prints have come out shifted to the left and front of the bed instead of dead center. They are smaller in scale than what is represented in my slicer (cura and slic3r). They are also coming out scaled longer in the z axis relative to the other dimensions. I get the feeling that either only the z-axis is the only aspect not being shrunk down or its just one more error on top of the other ones. The firmware I'm using was emailed to me by the kit's tech support after the printer was completed.
I've tried setting bed size in Cura back to defaults and using other slicers. The problem persists. Using my calipers and assuming the print is the center of a hypothetical bed, it seems that my bed is being assumed to be around 160mm wide instead of the actual 200mm.
Attached are images comparing how the object looks on a bed of the correct dimensions in slic3r and a picture of what I actually get in size and position