Hi All
I recently purchased and assembled the above 3d printer and it seems to perform fine, except that the Z axis seems to be erratic.
I have set the table bed height using a sheet of A4 paper and all seems ok except when I try to print a model.
The three axis go to the datum switches but when it goes to print the starting height of the Z axis is random, sometimes it starts a few mm above the surface and sometimes it can be as much as 20-30mm above the table and the plastic just falls to the table.
I have searched online but can find no definitve answer to my problems, is there anything you guys can suggest to help me?
SOLVED
Edited 1 time(s). Last edit at 01/12/2015 05:38AM by davy999.