Repetitive patterns in my prints and uneven wall thickness January 11, 2015 09:54AM |
Registered: 9 years ago Posts: 63 |
Re: Repetitive patterns in my prints and uneven wall thickness January 11, 2015 07:18PM |
Registered: 10 years ago Posts: 167 |
Re: Repetitive patterns in my prints and uneven wall thickness January 11, 2015 08:55PM |
Registered: 11 years ago Posts: 1,171 |
Re: Repetitive patterns in my prints and uneven wall thickness January 12, 2015 05:57PM |
Registered: 9 years ago Posts: 63 |
No, the hotend is really sturdy.Quote
Zerker
watching your print, does your hotend move at all?
Alright, I will not print with the heatbed hotter than 90°C anymore This indeed seems to help a lot!Quote
tmorris9
First problem you have is too much heat on the bed, it's know known that 85-90c is more than hot enough and higher can effect the print. Go to this page [reprap.org] and scroll down to "Part too hot" that black square is mine.
The zig zag looking pattern looks a lot like Z wobble to me, just do a search for it. Try printing that first item with the bed at 85c and slow the speed down say 25% and see if that helps (slower speed can help a little with Z wobble).
Re: Repetitive patterns in my prints and uneven wall thickness January 14, 2015 07:58AM |
Admin Registered: 11 years ago Posts: 3,096 |
Re: Repetitive patterns in my prints and uneven wall thickness January 14, 2015 08:33AM |
Registered: 10 years ago Posts: 903 |
Re: Repetitive patterns in my prints and uneven wall thickness January 14, 2015 09:29AM |
Registered: 9 years ago Posts: 351 |
Re: Repetitive patterns in my prints and uneven wall thickness January 14, 2015 10:27AM |
Registered: 9 years ago Posts: 1,011 |
Re: Repetitive patterns in my prints and uneven wall thickness January 14, 2015 11:57AM |
Registered: 9 years ago Posts: 63 |
Re: Repetitive patterns in my prints and uneven wall thickness January 14, 2015 12:54PM |
Registered: 9 years ago Posts: 1,011 |
Re: Repetitive patterns in my prints and uneven wall thickness January 14, 2015 01:35PM |
Registered: 9 years ago Posts: 465 |