Prusa i3 Rework Parts: What am I missing? June 04, 2014 12:03AM |
Registered: 9 years ago Posts: 30 |
Re: Prusa i3 Rework Parts: What am I missing? June 04, 2014 11:49AM |
Registered: 9 years ago Posts: 21 |
Re: Prusa i3 Rework Parts: What am I missing? June 04, 2014 12:25PM |
Registered: 9 years ago Posts: 30 |
Re: Prusa i3 Rework Parts: What am I missing? June 04, 2014 04:09PM |
Registered: 9 years ago Posts: 21 |
Re: Prusa i3 Rework Parts: What am I missing? June 04, 2014 04:10PM |
Registered: 9 years ago Posts: 30 |
Re: Prusa i3 Rework Parts: What am I missing? June 04, 2014 10:15PM |
Registered: 9 years ago Posts: 21 |
Re: Prusa i3 Rework Parts: What am I missing? June 04, 2014 10:43PM |
Registered: 9 years ago Posts: 30 |
Re: Prusa i3 Rework Parts: What am I missing? June 12, 2014 09:57AM |
Registered: 9 years ago Posts: 2 |
Quote
SimianSteam
I know I missed something. I always do. I'd rather find out now and be able to order it than pause the build while I'm waiting for that one part to come in.
Here's what I've bought so far:
Rework Melamine Frame- Includes the vertical frame, rear supports and the print bed frame.
....
Re: Prusa i3 Rework Parts: What am I missing? June 13, 2014 09:25AM |
Registered: 9 years ago Posts: 137 |
Re: Prusa i3 Rework Parts: What am I missing? June 13, 2014 12:30PM |
Registered: 9 years ago Posts: 30 |
Quote
pumm3l
Quote
SimianSteam
I know I missed something. I always do. I'd rather find out now and be able to order it than pause the build while I'm waiting for that one part to come in.
Here's what I've bought so far:
Rework Melamine Frame- Includes the vertical frame, rear supports and the print bed frame.
....
Would you mind sharing your BOM sources? I'm about to start ordering my kit, one of the things I'm hung up on is the hobbed bolt. The distance from the bottom of the head to the hob seems unclear as to what it should be.
Re: Prusa i3 Rework Parts: What am I missing? June 13, 2014 12:31PM |
Registered: 9 years ago Posts: 30 |
Quote
Bratan
Something I came across when building my Rework. 14mm m3 screws are too long to attach stepper motors to printed motor mounts! 12mm are perfect size. In fact a lot of 14mm m3 screws can be replaced by 12mm screws with better results (for example attaching z mounts to vertical metal plate).
I also assembled printer with Y motor in front following instructions, but I don't see why it can't be in the back. So I moved it to the back and also flipped motor to the right side of the moutning bracket (see pic). But follow my advise at your own risk, I didn't get my printer working just yet
Re: Prusa i3 Rework Parts: What am I missing? June 13, 2014 12:48PM |
Registered: 9 years ago Posts: 2 |
Re: Prusa i3 Rework Parts: What am I missing? June 13, 2014 12:49PM |
Registered: 9 years ago Posts: 30 |
Re: Prusa i3 Rework Parts: What am I missing? June 13, 2014 01:08PM |
Registered: 9 years ago Posts: 21 |
Re: Prusa i3 Rework Parts: What am I missing? June 14, 2014 12:48PM |
Registered: 9 years ago Posts: 21 |
Re: Prusa i3 Rework Parts: What am I missing? June 18, 2014 09:59PM |
Registered: 9 years ago Posts: 21 |
Re: Prusa i3 Rework Parts: What am I missing? June 19, 2014 12:15AM |
Registered: 9 years ago Posts: 21 |