Printed parts for Prusa i3 kit

Hello guys!

I'm about to purchase my first 3d printer kit from the very kind and helpfull Greg Colbourn.
I'm going for the "Prusa i3 (LC Frame) Full Kit (no plastic parts)" and I need some advice.

1. What plastic parts should I print out? (I'm going to ask Greg personally via mail but I've already asked him a bunch of questions and don't want to disturb him anymore right now)
You can see a picture of the printed parts from the kit that includes them, here.
Is it just the regular parts from the RepRap wiki? 'Cause when i try to compare the parts from the picture and the wiki I can't find every printed part on the picture.

Thanks guys!

Edited 1 time(s). Last edit at 03/02/2014 12:06PM by Archelon.

Looking at the parts there for the frame you are using everthing is there.

Correction you look to be missing the extruder gears

Quote
daveb500
Looking at the parts there for the frame you are using everthing is there.
Correction you look to be missing the extruder gears

Alright thanks for your reply, I never doubted if all the parts I was going to need was in the "Kit that includes printed parts".
I am going to print the plastic parts myself and what I wonder is
If I print all the .stl files from the RepRap wiki will I have all the printed parts which is shown on the picture?

Thanks!

Looking at the wiki yes

Okay thanks! I will also hear with Greg just to make sure!