Welcome!
Log In
Create A New Profile
Home
>
Reprappers
> Topic
Advanced
Extruder hot end
Posted by
carl-eric landell
Forum List
Message List
New Topic
carl-eric landell
Extruder hot end
December 09, 2013 04:12PM
Registered: 10 years ago
Posts: 4
Can the hotend be disabled somewhere in the Repetier 08 a look at manual control tells 410 the heat bed semms to work but something is wrong.
Reply
Quote
uncle_bob
Re: Extruder hot end
December 09, 2013 06:01PM
Registered: 10 years ago
Posts: 1,433
Does the temperature of the hot end read around room temperature?
Reply
Quote
carl-eric landell
Re: Extruder hot end
December 10, 2013 03:19AM
Registered: 10 years ago
Posts: 4
NO 410
Reply
Quote
uncle_bob
Re: Extruder hot end
December 10, 2013 12:20PM
Registered: 10 years ago
Posts: 1,433
If it's reading 410C (as opposed to error code 410) as a temperature on the display, that probably means your thermistors are plugged in the wrong place or are not wired properly (open circuit).
Reply
Quote
Newer Topic
Older Topic
Print View
RSS
Sorry, only registered users may post in this forum.
Click here to login