What Thermistor for Gen7 1.3.1

Hi,

Among the listed thermistors ( from [objects.reprap.org] ), is there some of them best suited for Gen7 1.3.1 fitted with 4.7 Kohm resistors as RT1, RT2 as shown in the Gen7 1.3.1 wiki page [objects.reprap.org] ?


EPCOS 100K Thermistor (B57540G0104F000)

RRRF 100K Thermistor

RRRF 10K Thermistor

RS 10K Thermistor

EPCOS 100K Thermistor (B57560G1104F)

Honeywell 100K Thermistor (135-104LAG-J01)

ATC Semitec 104GT-2

Could be used the same kind of thermistor for both nozzle and bed heaters ?

Thanks.

---

Nh3oh, suivez mon projet sur [deztrap.blogspot.com]

Any of the 100K thermistors will work with 4K7.

Yes you can use the same thermistor for the heated bed.

---

[www.hydraraptor.blogspot.com]

Hi,

is it possible to use a 5kOhm

(NTC) Typ M87 Epcos M87 = G 350 5 K -55 - +300 ºC

on the Gen7 Board? Can I leave the resistors as they are or do I have to make some modifications? The reason is that conrad electronics discontinued my previous thermistor "Epcos M87 10k"...

Thanks for your help...

Edited 1 time(s). Last edit at 03/26/2012 06:10PM by mindfab.