Welcome! Log In Create A New Profile

HELP

MatthewHall

HELP
November 26, 2016 08:03PM

Registered: 8 years ago
Posts: 120

So...thermistors. I just finished the last steps of calibrating my custom corexy 3d printer and then... I think the hotend thermistor is broken. When I turn the printer on the Full Graphic Smart Controller shows a min temp error. Any help would be greatly appreciated. Configuration.h is attached.

Reply Quote

Attachments:
open | download - Configuration.h (29.5 KB)

Mikk36

Re: HELP
November 27, 2016 04:19AM

Registered: 9 years ago
Posts: 125

If you think your thermistor is broken, measure it with a multimeter for resistance.

Reply Quote

MatthewHall

Re: HELP
November 27, 2016 07:20PM

Registered: 8 years ago
Posts: 120

What values should it display at room temperature? (I have a 100kohm thermistor)

Reply Quote

the_digital_dentist

Re: HELP
November 27, 2016 10:58PM

Registered: 11 years ago
Posts: 5,780

A 100k thermistor should be 100k at 25C - that's why it is called a 100k thermistor.