Welcome! Log In Create A New Profile

Advanced

With new Duet board idle temps high

Posted by Sardi 
With new Duet board idle temps high
April 15, 2017 12:35PM
Ive mounted my new Duet board, everything is working fine just the idle temps are high. They used to be arr 25C, now are arround 60C.

I have flashed the firmware and am now running DC42 1.17e with 1.14web, and I have added


M305 P0 H18.2 L-14 T10000 ; set ADC correction BED thermistor
M305 P1 H18.2 L-14 B4138 C0 ; set ADC correction HOT END thermistor

to my config.g.

What am I missing here?
Re: With new Duet board idle temps high
April 15, 2017 01:40PM
Your new Duet has 4.7k thermistor series resistors, so you need to add R4700 to all your M305 commands.


Delta printer calibration calculator, mini IR Z probe, and colour touch screen control panel: [escher3d.com]

Large delta printer, and other 3D printer blog postings: [miscsolutions.wordpress.com]

Disclosure: I have a financial interest in sales of the Panel Due, Mini IR height sensor, and Duet WiFi/Duet Ethernet [www.duet3d.com].
Re: With new Duet board idle temps high
April 16, 2017 03:27AM
Works. Thank you.
Sorry, only registered users may post in this forum.

Click here to login