Re: Cheap chinese E3D replica print head August 22, 2015 09:52AM |
Registered: 9 years ago Posts: 638 |
Re: Cheap chinese E3D replica print head August 22, 2015 10:29AM |
Registered: 9 years ago Posts: 1,699 |
Re: Cheap chinese E3D replica print head July 03, 2017 09:42AM |
Registered: 6 years ago Posts: 174 |
Re: Cheap chinese E3D replica print head July 08, 2017 07:28AM |
Registered: 9 years ago Posts: 1,699 |
Re: Cheap chinese E3D replica print head July 11, 2017 12:50PM |
Registered: 6 years ago Posts: 174 |
Re: Cheap chinese E3D replica print head July 12, 2017 05:16AM |
Registered: 10 years ago Posts: 14,672 |
Re: Cheap chinese E3D replica print head July 12, 2017 08:58AM |
Registered: 6 years ago Posts: 174 |
Re: Cheap chinese E3D replica print head July 12, 2017 02:39PM |
Registered: 10 years ago Posts: 466 |
Quote
dc42
If you are mostly going to print PLA then I advise sticking with the original hot end. It never jams. Whereas all-metal hot ends whether genuine E3D or not jam very easily using PLA, all it takes is a little too much retraction.
Re: Cheap chinese E3D replica print head July 12, 2017 04:45PM |
Registered: 6 years ago Posts: 174 |
Re: Cheap chinese E3D replica print head July 13, 2017 02:29AM |
Registered: 10 years ago Posts: 466 |
Quote
Karoo Klong
Wow that's quite good.
So you still sticking with the original horende then?
Ok so then I need to start figuring out what's wrong withy printer settings then.
Oh I found blue painters tape!
Will try that in my printbed.
Re: Cheap chinese E3D replica print head July 15, 2017 07:34AM |
Registered: 10 years ago Posts: 1,230 |
Quote
Karoo Klong
I have now reassembled the printer with the new revised aluminium parts and gave the printing another go with snowman.
I am using black ABS and bed temperature at 110'C and hot end at 240'C
Quote
I use hairspray for adhesion to the glass bed
Re: Cheap chinese E3D replica print head July 15, 2017 06:26PM |
Registered: 9 years ago Posts: 638 |